Kona the Chem-X pup Ask Kona!

FREE SHIPPING. EVERY PRODUCT. EVERY ORDER.
0
0
  • Suttner ST-160 Foam Injector - Chem-X

Suttner ST-160 Foam Injector

  • Only 9 left in stock

$176.80
$221.00

INCLUDES

  1. 3/8" Plug (Inlet)
  2. Chemical Pick Up Tube Barb (Inlet)
  3. 3/8" Coupler (Outlet)
  4. 10' Clear Pick Up Tube
  5. Chem-X Flow Cap
  6. 10 Dosing Nozzles & O-Rings

FEATURES / SPECS

  • Min/Max Flow Rate: 1.0-6.0 GPM
  • Min/Max PSI: 1000-4000 PSI
  • Rated For 194° Water

Suttner ST-160 Foam Injector

The Suttner ST-160 Chemical Injector is the most efficient and durable foam injector available, with a dilution range from 10:1 to 200:1. It automatically dilutes the soap to a predetermined strength eliminating soap waste or pre-mixing. The ST-160 arrives pre-set by us to draw at 100:1(1%) dilution, the ideal strength for all of our super concentrated liquids.

Directions:

  1. Connect ST-160 Injector after power washer, but before your high PSI hose. The St-160 is made ready with a stainless 3/8" quick connect plug on the inlet and a stainless 3/8" quick connect socket on the outlet.
  2. Place Chemical pick-up tube directly into soap.
  3. Foam your vehicle!

Tips + Tricks:

  • The injector is preset to run at a 100:1 ratio unless otherwise specified. You can easily adjust this by changing the metering tip inside the injector barb.
  • If you’re using a hot water machine, scale buildup from the coil can clog the injector or foam head. To prevent this, always start by running the injector in rinse mode for 30–60 seconds to flush out any residue.
  • If you need a jumper hose to connect your pressure washer to the ST-160 injector, check out our recommended products below.
  • Any other downstream injectors must be removed from your machine before use.
  • Maximum hose length after the injector is limited to 150 feet.
  • ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. However, if you provide the size of your power washer in the space provided above, we will include the necessary fittings needed to accommodate your power washer. QC orientation can be reversed upon request.
Chem-X

Contact us

Orders@Chem-X.com

EXPLORE

Copyright © 2025,  Chem-X

Back to top