Snake Oil: No-Touch Sio2 Ceramic Foam Sealant

In stock

$69.00

Size — 32 oz Snake Oil

Snake Oil: No-Touch Sio2 Ceramic Foam Sealant - Chem-X

FEATURES

No-Touch SiO₂ Ceramic Sealant – Adds protection without wiping or buffing
Up to 6 Months of Protection!
Hydrophobic Finish – Repels water, dirt, salt, and road grime
Fast Application – Spray on and rinse off in minutes
Gloss-Enhancing – Boosts shine and depth on all exterior surfaces
No Streaking – Leaves a smooth, residue-free finish when applied correctly
Safe on All Vehicle Surfaces – Clear coat, chrome, glass, rubber, and plastics
All-Weather Performance – Works in hot, cold, and humid conditions

ⓘ ARMORY INTEL

Snake Oil: No-Touch SiO2 Ceramic Foam Sealant

SNAKE OIL: NO-TOUCH SIO2 CERAMIC FOAM SEALANT

Snake Oil dramatically reduces drying time while also enhancing the gloss and shine. With a pH between 4-5pH, it is safe to use on all surfaces and coatings including polished aluminum. Snake Oil provides four season protection against UV rays and harmful road salts for up to 6 months. This is a significant improvement from prior testing indicating 60-90 days.

Snake Oil makes future washing a breeze as it does not allow dirt or road film to bond onto the surface. It’s a great addition to go along with the best touch free wash in the industry, our Chem-X Stars and Stripes.

SAFE ON ALL SURFACES

EXTREMELY HYDROPHOBIC

Protecting with snake oil

Dilution Ratios (Must be diluted for all application):

Foam Cannons: 4 Parts water : 1 Part Snake Oil

Pump Sprayers: 100 Parts water : 1 Parts Snake Oil

Power Washers: Run at 100:1

Directions:

How to Apply Snake Oil with the Chrome Cannon 2.0

Pre-Wash First
Start with a clean surface for best results. Use Chem-X Old Glory, Stars + Stripes, or another pre-wash to remove dirt, film, and grime.
Rinse thoroughly before applying Snake Oil.
Mix Snake Oil in Chrome Cannon
In your Chrome Cannon bottle, mix 4 parts water to 1 part Snake Oil.
Shake gently to combine.
Foam the Vehicle
Apply foam evenly from top to bottom, covering paint, plastic, chrome, glass, and wheels.
Avoid letting it dry on the surface.
Dwell Time
Allow to dwell for 30–60 seconds to bond and activate.
No scrubbing or agitation needed.
Rinse Off Thoroughly
Rinse bottom to top, then top to bottom with high pressure.
Ensure all product is removed.
Dry
Blow dry or towel dry to reveal a slick, hydrophobic, high-gloss finish.

How to Apply Snake Oil with a Pump Sprayer

Pre-Wash the Vehicle
For best results, start with a clean surface. Use a pre-wash like Stars + Stripes to remove film, salt, and grime.
Rinse thoroughly before applying Snake Oil.
Mix Snake Oil for Sprayer Use
Dilute Snake Oil at a ratio of 50:1 (water to product).
For example, mix 25 oz of water with 0.5 oz of Snake Oil in a 32 oz pump sprayer bottle.
Spray Evenly
Mist the diluted solution evenly across the surface, covering paint, plastic, chrome, glass, and wheels.
Work in the shade and avoid applying to a hot surface.
Dwell Time
Allow to sit for 30–60 seconds. Do not allow it to dry.
Rinse Thoroughly
Use high pressure to rinse off bottom to top, then top to bottom.
Make sure all residue is removed.
Dry
Blow dry or towel dry to finish. The surface will be slick, shiny, and hydrophobic.

How to Apply Snake Oil with a Power Washer

Pre-Wash the Vehicle
Start with a clean surface. Use Chem-X Old Glory, Stars + Stripes, or another pre-wash to remove grime and road film.
Rinse thoroughly before applying Snake Oil.
Prepare Your Soap Tank or Pickup Tube
Add Snake Oil to your detergent tank or place the pickup tube directly into a container of undiluted Snake Oil.
Your injector or soap setting should achieve a final PIR of 50:1.
Apply Using a Soap Nozzle
Switch to your low-pressure soap nozzle and spray a light, even coat over the entire vehicle—paint, glass, wheels, chrome, and plastic.
Do not allow product to dry on the surface.
Dwell Time
Let Snake Oil dwell for 30–60 seconds to activate its hydrophobic and ceramic properties.
Rinse Completely
Switch to your high-pressure rinse nozzle.
Rinse thoroughly from bottom to top, then top to bottom to ensure full coverage and removal.
Dry
Blow dry or towel dry for a slick, glossy, water-repellent finish.

Pro Tips For Best Results:

Apply to a wet surface—Snake Oil activates best when used immediately after rinsing
Do not let it dry on the surface; always rinse within 60 seconds
Apply in shade or on cool panels to avoid premature drying

FAQs

Is Snake Oil Safe on all vehicle surfaces?

Yes! Snake Oil is safe on paint, glass, chrome, plastic, rubber, and wheels. Just apply it to a clean, wet surface and rinse thoroughly for best results.

Will Snake Oil strip wax or ceramic coating?

No—it’s designed to enhance existing protection. Snake Oil is coating-safe and helps maintain slickness, gloss, and hydrophobic behavior between washes.

Do I need to scrub or wipe after applying Snake Oil?

Nope—just foam, dwell, and rinse. Snake Oil is completely touch-free when used correctly.

How long does the protection last?

Snake Oil provide up to 6 months of hydrophobic protection.

Can I use Snake Oil after Stars + Stripes or Old Glory?

Yes! Snake Oil is a perfect follow-up to touch-free pre-washes like Stars + Stripes or Old Glory. Just be sure to rinse thoroughly and NOT to dry before applying Snake Oil.

What’s the difference between Snake Oil and Awesome Sauce?

Both are ceramic-based sealants, but they’re designed for different application styles:

Snake Oil is a touch-free SiO₂ foam sealant—foam it on, rinse it off. It’s fast and effective.
Awesome Sauce is a spray-and-wipe ceramic detailer—great for applying after drying, boosting gloss, and adding a slick finish between washes. It requires a towel for application and leveling.

Amazing product

This coating is a marvel of science. I applied it on both of our vehicles after using old glory, and it repels dirt and water like a slippery shield. No beading and the vehicles look as clean as when I initially washed them.

Snake oil

5 Stars – A Game-Changer for My Wash Routine!
I’ve been using Snake Oil for a few weeks now, and I’m seriously impressed. The first thing I noticed was how much faster drying became — water just sheets off the surface. But what really blew me away was the gloss. My truck looks like it just rolled out of a showroom.

What’s even better is the long-lasting protection. I’ve gone through some rough winter roads lately, and the salt and grime don’t seem to stick like they used to. Washing it after a storm is way easier now.

I also appreciate that it’s safe on polished aluminum — I don’t have to worry about it dulling anything. And paired with Chem-X Stars and Stripes? Absolute perfection. This is definitely staying in my detailing lineup. Highly recommend!

Snake oil is some great stuff.

Snake oil

When I got the invite to the Peterbilt Open House I thought I was going to hand wax the whole truck. After washing the truck by hand with Liquid X & then foaming on the Snake Oil I didn’t touch it. Took the leaf blower like they suggest & BAM I was done! Best line of products I’ve ever found for washing. And I’ve been washing trucks I have driven for 30 + years

Snake Oil 👍

I tried the 32 ounce first. I love it so much, I came back and bought a gallon. Very good durability, even on wheels, compared to similar products out there. Very easy to use.