Foam: Mitt Wash

Bucket Application - 2.5 gal water : 1 to 6 oz Foam: Mitt Wash

Foam Cannon Application - 4 parts water : 1 part Foam: Mitt Wash to 10 parts water : 1 part Foam: Mitt Wash

Standard Down/Up Stream Injector Application - 4 parts water : 1 part Foam: Mitt Wash to 10 parts water : 1 part Foam: Mitt Wash

Bucket + Mitt Application:

1. Pour 1-6 ounces into full bucket of water, spray a hard stream of water directly into the bucket to activate foam.

2. Pre rinse vehicle to remove any heavy buildup.

3. Apply to the car or truck surface with a mitt, sponge or brush.

4. Rinse from top down.

Foam Cannon Application:

1. Pour Foam into cannon at anywhere from 4:1 to 10:1. Top off with water.

2. Tighten foam cannon air knob to max for best foam thickness.

3. Foam the car or truck surface from bottom to top, work in sections so as not to let it dry.

4. Agitate with a mitt, sponge or brush.

5. Rinse from top down.

Foam Injector Application:

1. Insert pickup tube in soap container.

2. Foam the car or truck surface from bottom to top, work in sections so as not to let it dry.

3. Agitate with a mitt, sponge or brush.

4. Rinse from top down.

Standard Down/Up Stream Injector:

1. Dilute anywhere from 4:1 to 10:1. Water first then add your soap.

2. Apply to car or truck surface from bottom to top, work in sections so as not to let it dry.

3. Agitate with a mitt, sponge or brush.

4. Rinse from top down.

• Pre-rinse vehicle before foaming to remove loose dirt.
• Use the two-bucket method (wash + rinse) for added paint safety.
• Clean your wash mitt between sections to avoid cross-contamination.
• Dry with a soft microfiber towel for a streak-free, glossy finish.
• For added gloss and protection, follow with Snake Oil or Awesome Sauce.