The Big Easy - Foaming Injector + Complete Lance Kit

Select Your Current Nozzle Size:

The Big Easy Foaming Kit

A plug & play kit that allows anyone with a power washer to foam on a single soap AND a high PSI rinse with one lance. This kit includes a  Suttner ST-160 foaming injector that  gives you the power to dial in your soap usage. Get a 100% consistent & adjustable ratio. Also, the ST-160 allows you to now run a foam nozzle on the lance. Traditional injectors do not. Say good bye to swapping out foam cannons and refills while washing. 


  • 44" Chem-X Foam Lance
  • ST-160 Foaming Chemical Injector
  • 1 Gallon of Foam - Neutral Foaming Mitt Soap


  • Foam + Rinse With One Lance
  • Includes 1 Gallon Super Concentrated Soap
  • Works On Any Power Washer
  • Uses 4-5x Less Soap Than Traditional Style Injectors 
  • Super Streamlined Design For Large Fleet Washing
  • Stainless Steel Components + Universal Fittings
    SUTTNER ST-160 

    The Suttner ST-160 Single Chemical Injector is the most efficient and durable foam injector available, with a dilution range from 12:1 to 200:1. Constructed completely from high quality stainless steel and no moving parts this injector was built to last. MORE INFO HERE.


    • Plug + Play
    • Uses 4-5x Less Soap Than Traditional Style Injectors
    • 9 Dosing Nozzles Included
    • Durable Stainless Steel Construction
    • Food Grade Quality

    *Other downstream injectors must be removed from your machine.
    *Limited to 150' of power washer hose after the injector.
    *ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.


     Change between rinse and foam directly at the gun. Simply release trigger and twist The Suttner ST-58 Change Over Valve to either rinse or foam. The Chem-X Foam Lance screams quality and durability. Built with as much stainless steel as possible and designed to be very easy to use. By far the best foam lance on the market! MORE INFO HERE.

    1. Suttner ST-75s Foaming Nozzle
    2. Suttner ST-58 Change over Valve
    3. Suttner ST-2305 Trigger
    4. Mosmatic DGV Swivel
    • Safe On Wax And Ceramics.
    • Neutral pH And Body Shop Safe
    • Can Be Applied In A Wide Range Of Ratios From 25:1 To 150:1


    1. Connect ST-160 Injector after power washer and before your high psi hose. 

    The ST-160 will be made ready with a stainless 3/8" quick connect plug on the inlet and a stainless 3/8" quick connect socket on the the outlet.

      2. Attach your power washer hose to the Shut Off Gun using the provided quick connect plug or hard pipe hose directly into Mosmatic DGV Inline Swivel.

      3. Place the chemical pick up tube into the gallon of Foam.

      4. Foam all of the things!

      • Injector will be set to run at 100:1 unless specified otherwise, this can be changed by simply changing metering tip inside injector barb.
      • If using a hot water machine, scale build up from your coil can plug injector or foam head. On start up always run with injector in rinse mode for about 30-60 seconds to flush out any build up.
      • If a jumper hose is needed to go from your power washer to ST-160 injector please see our selection of hoses in accessories.
      • This item usually ships within one week of order. 

      Figuring out your CURRENT NOZZLE SIZE:


      Repair Common Issues on Suttner Foam Gear:

      SPECS :

      Chem-X Foam Lance

      • Stainless Steel Components
      • Min/Max Flow Rate: 1-6gpm
      • Min/Max PSI: 1000-4000psi
      • Adjustable Vented Grip
      • Suttner ST-58 Change Over Valve

      Suttner ST-160

      • Durable Stainless Steel Housing
      • 9 Metering/Dosing Nozzles, chemical can be set to desired strengths
      • Min/Max Flow Rate: 1-12gpm
      • Min/Max PSI: 1000-4000psi
      • Rated for 212 Degree Water

      Suttner ST-2305 Shut Off Gun

      • Easy Pull Trigger
      • Forged Brass Housing
      • 5000 PSI