X Factor Hot Water Stationary 220v Electric Power Washer
We have teamed up with our power washer manufacturer to design the ultimate line of power washers, the X Factor Series!
These units reflect our lifetime of experience of wrenching on power washers in the field. We have now designed the most durable power washer layouts for all situations.
This is our Hot Water Stationary 220v Electric Power Washer. A beast of a machine with the added benefit of heat. This unit comes with the option of Natural Gas, Propane, or Oil for your burner fuel source. The tip ahead shroud gives full access to the drive system for easy service/maintenance.
1. X Factor Hot Water Stationary 220v Electric Power Washer
2. Suttner 48" Gun and Wand Assembly with KEW Connect System
3. 100' x 3/8" 6000psi High Pressure Hose Hose
4. 1 Soap Nozzle + 0°/15°/25°/40° Nozzles
5. Downstream Chemical Injector
Pump + Plumbing Layout
These power washers feature a Commercial Duty Triplex Plunger General Pump, along with our own unique plumbing layout designed for easy serviceability.
The VRT3 Unloader Valve (pressure actuated for foaming systems) is mounted with a 3/8 screw coupler to drastically reduce repair times.
The garden hose inlet is a General Pump DuraView Filter to remove any particulates from the water line and can be visibly checked without opening.
The auto start/stop feature protects the pump from overheating while the unit is on but water is not being sprayed by automatically turning off the pump after a 15-30 second period, the dual pressure switches on the machine will sense the psi drop the next time the trigger is squeezed and turn the motor back on.
These machines also feature an hour meter to determine the best times for pump oil changes.
Stationary machines come wired with a connection/port for an optional Remote On/Off Switch. The Remote Switch is typically mounted in convenient location away from the machine. A Remote Switch can be added at time of purchase or at any point in the future.
The TechTop Motor is totally enclosed and fan cooled with thermo protection to prevent overheating.
Coil + Burner
Elliptically wound cold coiling process of stretched reduced full body normalized ASTM A53 GRB schedule 80 . The coil is structurally braced to minimize pipe wear and vibration. It is sealed with a ceramic blanket in a stainless steel housing.
Quality North American made natural gas, propane or oil fired burners and controls with adjustable thermostats are used for efficiency, dependability and serviceability. NG and LP units are equipped with quick clean burner apparatuses. Burners jets have 6 oxygen orifice inlets to ensure maximum burn and minimize CO results.
We have paired these units with the highest quality trigger, lance and hose combination on the market. We chose the Suttner ST-2305 Squeeze Trigger with KEW Connects and a 48" Stainless Steel Lance. More info here.
KEW Connects give the flexibility of multiple length lances and attachments without the common o-ring issues typically seen in standard quick connects, they are much less likely to jam and also allow for swiveling the lance to get into tough areas like wheel wells and engine compartments.
The Mosmatic High PSI Gun Inlet Swivel eliminates hose fatigue, swiveling under full PSI. The dual wire braided 100' Hose offers maximum durability, rated for 6000psi.
- 4.0GPM@2000PSI (5hp model)
- 4.0GPM@3000PSI (7.5hp model)
- Commercial Duty Triplex Plunger General Pump
- Oil Bath Crank Case
- Stainless Valves
- Brass Manifold
- Belt Drive
- Thermo Pump Protector
Electric Motor (5hp + 7.5hp)
- 220 Volt
- 30 Amps (5hp model)
- 50 Amps (7.5hp model)
- 1750 RPM
- Totally Enclosed Fan Cooled
- Full Frame
- 1.15 Service Factor
- Thermal Overload Protection
- Continuous Duty
Electrical Control Panel
Heavy Duty On/Off Cam Switch with Included Auto Stop/Start Time Delay Off
- Nema 4
- Water Tight
- Easy Access
- Wired for Optional Remote On/Off Switch
- Scheduled 80 Pipe
- Elliptically Wound & Stretched
- No Seam Welds
- Structurally Braced to Reduce Vibration & Pipe Wear
- Sealed with Ceramic Blanket
- Stainless Steel Housing
- Natural Gas, Propane or Oil Fired
- Adjustable Thermostat
- On/Off Switch
- North American Made
- Serviceable Frame
- All Welded
- Powder Coated
- 11 Gauge Bent One Piece Plate
- Tip Ahead Shroud With Built in Belt Guard Designed to Fully Expose All Components for Ease of Maintenance
- 10 Gallon Poly Fuel Tank (*Oil Fired Units)
- Skid Style Frame
Power Washer Dimensions
- Width: 26"
- Depth: 48"
- 5hp Model: 730 lbs
7.5hp model: 780 lbs
X Factors are stocked at Chem-X and ship free via freight in 3-7 business days.
Once order is placed we will reach out to finalize shipping details.
X Factors are built in North America.