Your cart

Dual PF22 Foam Cannons w/Valve Assembly - Chem-X
Dual PF22 Foam Cannons w/Valve Assembly - Chem-X
Dual PF22 Foam Cannons w/Valve Assembly - Chem-X
Dual PF22 Foam Cannons w/Valve Assembly - Chem-X
Dual PF22 Foam Cannons w/Valve Assembly - Chem-X
Dual PF22 Foam Cannons w/Valve Assembly - Chem-X

Dual PF22 Foam Cannons w/Valve Assembly

Regular price $209.00 Sale


Our upgraded Touchless Foam Cannons features the MTM Hydro PF22 Professional Foam Cannons. The included selection valve makes pH shock based touchless washing with M-Shine and Red-Line easy and affordable. *Does not include soaps, click here for Touchless Foam Cannons w/soaps.


  • (2) - MTM Hydro PF22 Professional Foam Cannons
  • (1) - Valve Assembly Made Ready w/Quick Connects
  • M22 and QC Plug Fittings Included with each Foamer


The Innovation of the PF22 Foam Cannon lies in the nozzle. This foam cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam.



  • Adjustable Chemical Injection Knob
  • Single Cast Plated Brass Body
  • Replaceable Filter
  • New Ergonomic Easy Grip Bottle
  • Adjustable Fan Blades (jet-wide)
  • Adjustable Spray Pattern (horizontal or vertical)
  • Foams well between 1,100-5,000 PSI 
  • Will work on 1.8-5.3 GPM power washers
  • Rated up to 140℉ water


Pour M-Shine into one foamer and Red-Line separately into other foamer.

Set adjustment knob on top of foamer to desired strength, tighten knob for thicker foam and higher performance, loosen knob to conserve soap usage and frequency of refills. *

Remove lance and attach Dual Foam Cannon directly to power washer gun. Foam M-Shine onto vehicle and go directly over M-Shine with Red-line. Apply these foams in manageably sized sections working from bottom up. Keep in mind the goal of being able to rinse the soaps off before they have a chance to dry. Ideally each soap would have about 1-2 minutes of cling time before getting either neutralized or rinsed.

Once an area has been foamed with both steps begin a high psi rinse. When rinsing we recommend an up close rinse. We find it works best to rinse from the bottom up, by doing this you can use the foam line to keep track of where you have hit with high psi rinse.**


 * Ideal strength is determined after seeing the results of the first wash, the goal is to use as little soap as possible while getting a great wash. Two things that help get an effective touchless wash are good soft water and also heated water up to 140 degrees if available.

**Try not to wash in direct sunlight as this will greatly accelerate drying. When washing mirror polished aluminum always make sure aluminum is cool to the touch before applying soap and never let soaps dry. If you are just off the road and you have polished fuel tanks avoid washing until tanks are cool.

-If using a hot water machine, scale build up from your coil can plug the foam filter. On start up always run power washer line clear before attaching foamer for about 30-60 seconds to flush out any build up.

*Remember to always wear your PPE (personal protective equipment)

What customers are saying about  

Join the Conversation