Stars and Stripes: Chrome Cannon Kit

A two-step, touch-free foam wash built for maximum performance in less time.

In stock

$99.00

~~$117.00~~

Sale

Option — 32 oz Stars + 32 oz Stripes With Chrome Cannons

Stars and Stripes: Chrome Cannon Kit - Chem-X

FEATURES / SPECS

STARS + STRIPES ULTIMATE TOUCH FREE VEHICLE WASH:

*Each kit includes 1 bottle of Stars and 1 bottle of Stripes; Choose either 32 OUNCE STARS + 32 OUNCE STRIPES ~ OR ~ 1 GALLON STARS + 1 GALLON STRIPES*

Fastest, Most Effective Touch Free Wash: Saving Both Time + Labor!
Removes Road Film
Erases Bugs
Great Tire + Rim Cleaner
Neutralizes Road Salt
Mild pH Runoff

CHOOSE YOUR FOAM CANNON!

*Each kit includes 2 Foam Cannons; Choose either 2 CHROME CANNON 2.0 ~OR~ 2 MTM PF22.2 FOAM CANNONS*

1.THE CHROME CANNON 2.0:

HDPE Bottle for Maximum Durability
Built-in Ratio Guide on Bottle
1.15 Nozzle Installed + 1.25 Nozzle Included
Fully Adjustable Nozzle Pattern, with Both Degree + Vertical or Horizontal Orientation
Weighted, Flexible-Draw Pickup Tube for Foaming at Any Angle
Wide Mouth Opening
Wide Base for Stability
QC Plug Fitting Included
Adjustable Fan Blades
Adjustable Chemical Injection Knob

THE CHROME CANNON 2.0 SPECS:

34oz/1,000ml Capacity
Max Pressure: 4,000 PSI
Max Flow 5.3 GPM
Rated up to 140°F Water

2. THE PF22.2 FOAM CANNON:

Wide Mouth
Stainless Steel Filter
Adjustable Chemical Injection Knob
Single Cast Plated Brass Body
Replaceable Filter
Adjustable Fan Blades (jet-wide)
Extra Foam Agitator Pad
M22 + QC Plug Fittings

THE PF22.2 FOAM CANNON SPECS:

Foams Well Between 1,100 - 5,000 PSI
Will Work on 1.4-5.3 GPM Power Washers
Rated up to 140°F Water

THE TOUCH FREE FOAM CANNON KIT

Chem-X Stars + Stripes when combined on the vehicle surface create the ultimate touchless wash. These formulas are designed for everything from the most high end show trucks and trailers to cars, motorcycles, hot rods, RV's, buses to construction equipment.

STARS + STRIPES

When Stars+Stripes mix on the vehicle surface, a resulting pH shock will activate the cleaning reaction. This dual stage process breaks the static bond of dirt and road film from the surface, allowing the high psi rinse to remove more grime than any single stage application and also results in a neutral pH. This process saves the user up to 80% of the time it would normally take to do a mitt wash. Using two soaps also lets us tackle more grime by allowing us to use a wider range of surfactants that help with many different types of grime.

2 FOAM CANNON OPTIONS

Each kit includes 2 foam cannons.

Choose Either

2 CHROME CANNONS ~OR~ 2 PF22.2 FOAM CANNONS

Stars and Stripes Ultimate Touch Free Vehicle Wash Foam Cannon Kit - Chem-X

CHEM-X CHROME CANNON

MTM PF22.2 FOAM CANNON

Dilution Ratio:

1. Fill both foamer bottles with 4 parts water : 1 part soap

4. Set adjustment knob on top of foamers to minimum, this will conserve soap usage and frequency of refills. If needed tighten knob toward plus to increase foam thickness and performance for extra dirty jobs or road film that has baked on for a long period of time.

WASHING Directions:

BFORE YOU START...

No situation is the same in the world of washing & degreasing. Different seasons, paint conditions, power washers, etc all play a huge role in how you wash.

STARS + STRIPES arrives SUPER concentrated. Stretch it out or go a little heavier. This is up to you. Wash a small section and adjust your soaps if needed. Use this technique when ever starting a new wash.

Before applying STARS, we recommend performing a high-PSI pre-rinse to remove any heavy buildup.

Step 1: Apply Stars (Blue)

Use a foamer or soap nozzle
Foam bottom-up to avoid streaking
Dwell time: 30–60 seconds (do not let dry)

Step 2: Apply Stripes (Red)

Foam directly over Stars, no rinse in between
Apply again, bottom-up
Dwell time: another 30–60 seconds

If you’re working on a vehicle with heavy grime or buildup, you can extend the dwell time for better results—just be careful not to let the soap dry on the surface.

Step 3: Rinse Thoroughly

Rinse left to right, starting at the bottom of the foamed section
Use high-PSI and stay within 12" of the surface
Missing a section while rinsing may leave behind road film

(Optional) Step 4: Add Snake Oil For Protection

Apply after rinse, while vehicle is still wet
Let sit for 30–60 seconds
Rinse to reveal a slick, glossy, water-beading finish

TIPS + TRICKS:

Try not to wash in direct sunlight as this will greatly accelerate drying. When washing mirror polished aluminum always make sure aluminum is cool to the touch before applying soap and never let soaps dry. If it's too hot to touch we recommend a cold water pre-rinse.
After rinsing, dry the surface to prevent any water spots from forming. However, if you plan to follow up your wash with Snake Oil, apply Snake Oil before drying your vehicle.
Consider using a leaf blower for efficiency or, even better, a drying towel with a spray detailer for a flawless finish.

CHEM-X STARS + STRIPES: THE MOST AMERICAN WAY TO WASH

I'd found non-contact chemistry, but no

It doesn't wash, there's plaque left, so you'll have to use a rag. I was hoping I'd found non-contact chemistry, but no

It is a fantastic system

It is a fantastic system. Love howeffortlessly it works

I'm very impressed with Stars and Stripes and recommend everyone to make the purchase

I'm very impressed with Stars and Stripes and recommend everyone to make the purchase. One thing I will say it’s very important to follow the instructions on the containers if you want the best results. I recommend purchasing the foam cannons as well. Bob makes one Hell of a product, thank you to everyone at ChemX!!

I love this product

I’m genuinely grateful for how easy the Chemex Stars & Stripes makes things. I don’t even have to think about it—just follow the recommended ratio, and it applies super smoothly. Plus, it comes off like a breeze. Honestly, it’s made everything more efficient and productive for me.

Stars and Stripes is amazing, been using for a year!

I’ve been using Stars and Stripes for about a year now. It’s amazing how well it works! When used on a coated vehicle, you can achieve a good 98% clean touch-free! I still will blow dry the vehicle if I haven’t done a contact wash, but this has made maintence of my vehicles so fast! I can do my Ram 1500 GT, washed and blow dried, in around 15 minutes and achieve near perfect results! I keep 5 gallons mixed up ready to go of each Stars and Stripes for quickness and ease of use. I will say that I was a skeptic until I tried it. Now, about a year into it and having gone through 15 gallons, I’m a believer!