*We have maxed out the value of Red-Line by now bottling it at 100:1 super concentrated strength, which means you can now get 4 times the washes out of this system! Each gallon can make up to 5 gallons of ready to use soap directly through power washer, cut 3:1 in foam cannons or be left undiluted and used in the Chem-X THe Big Easy Kit or Real Deal Kit that are pre set at 100:1 dilution for super efficiency!
Chem-X Red-Line is a time tested workhorse that never lets off the gas. This chemical formulation is designed to outperform any high pH cleaner and still be safe to use on all surfaces.
Used independently Red-Line is a tough as nails vehicle wash, with the flexibility to become a tenacious degreaser with hot water. Red-Line alone carries the workload of several cleaners, while also being budget friendly.
Red-Line plays a huge role in our Chem-X Touchless Wash. By applying Red-Line directly over Chem-X M-Shine you create a pH shock leaving the surface of the vehicle pH neutral. This process breaks the static bond of dirt and road film from the surface, allowing the high psi rinse to remove more grime then any "touchless" single soap application.
Tough independant cleaner
Effective degreaser when used with hot water
Stage two in Chem-X Touchless Wash
Safe on all surfaces
DIRECTIONS FOR USE:
Chem-X Red-Line can be be applied in many ways.
POWER WASHER: Pour 1 gallon of Red-Line concentrate into bucket and add 3-4 gallons of water. Apply soap through power washer. Brush surface and rinse thoroughly.
FOAM CANNON: Pour concentrated Red-Line into foamer until 1/4 of the way full, top off with water. Adjust metering knob to minum setting. Foam onto vehicle, brush surface and rinse thoroughly.
BRUSH APPLICATION: To cut to ideal strength, start at 100:1 into bucket, then adjust strength as necessary.
TOUCHLESS CLEANING THROUGH POWER WASHER:Apply Chem-X M-Shine as a pre-soak, then apply Chem-X Red-Line directly over Chem-X M-Shine to activate the cleaning reaction; this two step process breaks the static bond of dirt and road film from the surface, and results in a neutral PH.
*Remember to always wear your PPE (personal protective equipment)