Kona the Chem-X pup Ask Kona!

Patriot Powder

George Washington returns, stepping out of a cloud of pure American ingenuity. Not in a Dodge Challenger, but in a stealth fighter fueled by powdered perfection. He’s seen the liquid version in action, and he’s impressed. But now? Now, he’s packing a more concentrated, space-saving, dirt-demolishing weapon. Each jar condenses an entire gallon of our legendary liquid Stars and Stripes into a travel-ready powder that foams harder, cleans deeper, and hits road film like a cannon blast at Yorktown.
Stars goes first, breaking down the toughest dirt defenses. Stripes follows, triggering a chemical reaction so powerful, even road film starts waving a white flag. Blast it off with high PSI like you’re storming the beaches. When the dust settles, dry your rig, run your finger across the surface, and prepare to salute; because what you’ll see is nothing short of freedom from filth.

DIRECTIONS / TIPS / DILUTIONS

Directions

Freedom From Filth in Just 4-Steps:

STEP 1: Knock off any heavy build-up with a high PSI pre-rinse.

STEP 2: Foam STARS onto the vehicle, working from bottom to top. Work in a manageable-sized section. Streaking can occur on polished aluminum if the soaps dry before they are rinsed off.

STEP 3: Foam STRIPES directly over Stars working from bottom to top. DO NOT let the soap dwell. It's important to start rinsing while both soaps are still foamy and clinging to the surface.

STEP 4: Rinse left to right, starting at the bottom of the foamed area. Use high PSI and stay within 12" of surface. Doing this creates a line in the foam and lets you keep track of where you have not rinsed yet. Missing a section while rinsing will leave behind road film.

Tips / Tricks

  • Use warm water (110°F–130°F) to dissolve powder and improve foam
  • Label jugs clearly, Stars (blue), Stripes (red)
  • Store pre-mixed soap in a cool, sealed container
  • Never let soap dry on vehicle surface
  • Always rinse thoroughly to avoid spotting or streaks
  • Before applying STARS, we recommend performing a high-PSI pre-rinse to remove any heavy buildup.
  • Apply Snake Oil after washing for an extra layer of protection
Dilutions
  • Foam Cannon Mixing:

1. Fill two foam cannons with water to the max fill line.

2. Using the included scoop, add one scoop of Stars into one foam cannon, and one scoop of Stripes into the other foam cannon.

3. Agitate slightly and let dissolve for 1-2 minutes.

  • 5 Gallon Pail Mixing

1. Fill two 5 gallon pails with water.

2. Pour 16oz of Stars powder into one pail, and 16oz of Stripes powder into the other pail.

3. Shake well, let dissolve for 20 minutes.

4. Dispense straight into a foam cannon or put your power washer soap tube straight into the pail.