BULK Old Glory: Touch Free Active Foam Vehicle Wash Cases - Chem-X
A 5 gallon pail of 'Old Glory: Touch Free Active Foam Vehicle Wash' with an American flag and an eagle on the label.
A 55 gallon bucket of 'Old Glory: Touch Free Active Foam Vehicle Wash' with an American flag and an eagle on the label.
A person holds a bottle of Chem-X Old Glory over a white bottle, demonstrating single-step touch-free cleaning with the text 'SINGLE-STEP TOUCH-FREE CLEANING' across the top of the image. The Chem-X Old Glory bottle has a black label with red, white, and blue graphics, and the white bottle has a circular Chem-X logo on the front.
A close-up of a truck door covered in dripping foam, with the text 'THICK, CLINGING FOAM' overlaid across the lower middle. An American flag is faintly visible in the dark background above the truck.
A black GMC pickup truck covered in white soap foam, photographed from the front in a wash bay. White text to the left reads 'FAST RINSE, NO RESIDUE.'
A gray off-road truck covered in white foam, photographed inside a dark wash-bay. Large text in the upper left reads 'HYPER-CONCENTRATED FORMULA.'
A close-up of a plastic gallon container of Old Glory Touch-Free Active Foam vehicle wash, showing the back label with instructions, dilution ratios, and application directions.

BULK Old Glory: Touch Free Active Foam Vehicle Wash Cases

Save 15%
Sale price$346.80Regular price $408.00
Option
Option: QTY: (12) 32 oz Old Glory Case
In stock, ready to ship
FEATURES
  • Single-Step Touch-Free Cleaning
  • High-pH Formula (pH:13)
  • Hyper-Concentrated Formula
  • Thick, Clinging Foam
  • Fast Rinse, No Residue
HOW TO USE

1. Rinse vehicle to remove loose debris.

2. Foam entire vehicle with Old Glory solution.

3. Allow to dwell for 30–60 seconds (do not let dry).

4. Rinse thoroughly with high pressure. 

Pairs well with

DIRECTIONS / TIPS / DILUTIONS

Directions

1. Rinse vehicle to remove loose debris.

2. Foam entire vehicle with Old Glory solution.

3. Allow to dwell for 30–60 seconds (do not let dry).

4. Rinse thoroughly with high pressure.

Tips / Tricks

  • Do NOT allow Old Glory to dry on the surface, especially in direct sunlight.
  • Avoid use on polished aluminum unless diluted beyond 100:1 and used with caution.
  • Test on sensitive finishes before full application.
  • Always rinse thoroughly to prevent spotting or streaks.
Dilutions
  • FOAM CANNONS: 4 parts water : 1 part Old Glory
  • PUMP SPRAYERS: 100 Parts Water : 1 part Old Glory
  • POWER WASHERS: Run at 100:1

*Note: If you're using a Chem-X/Suttner Foam Injector, it automatically dilutes at 100:1. Just place the pickup tube into your gallon of Old Glory and tighten the Chem-X Flow Cap; the injector does the rest.