Our new Xtreme Foam Kit is a great start to get the Chem-X shine going strong. The MTM Hydro PF22.2 is one of the most effective ways to work with the Liquid-X product. Cut Liquid-X 10:1 into the foamer and add warm water, turn the injector knob down to minus and get great foam and tons of synthetic polymer sealant washes out of a 32oz bottle! The Innovation of the PF22.2 Foam Cannon lies in the nozzle. This foam cannon offers not only adjustable fan blades but now offers an adjustable spray pattern (vertically or horizontally) as it throws thick foam onto your vehicle, house, fence, sidewalk, roof or other washable items. The chemical injection knob on top allows for more or less chemical to be drawn through the internal chamber, increasing or decreasing the foam output. This allows the internal agitator to create a dense foam.
Adjustable Chemical Injection Knob
Single Cast Plated Brass Body
New Ergonomic Easy Grip Bottle
Adjustable Fan Blades (jet-wide)
Adjustable Spray Pattern (horizontal or vertical)
Foams well between 1,100-5,000 PSI
Will work on 1.8-5.3 GPM power washers
Rated up to 140℉ water
*M22 and QC Plug Fittings Included
Foam Cannons will only work on machines that have a pressure-actuated unloader. With a pressure-actuated unloader you will have an instant snap/pop of full pressure when the trigger is pulled. **This is what you want for a foam cannon to operate.
With a flow actuated unloader you will have a smooth ramp up from low to high pressure when the trigger is pulled. **This style will not work with foam cannons. Foam Cannons do not operate on pressure washers that have flow-sensing/flow-actuated unloaders.Typically, you will have pulsing foam indicating pressure spikes and drops which the flow-actuated unloaders cannot accommodate.
If you would like assistance to confirm what style unloader you have we can be reached at firstname.lastname@example.org or (800)624-5403. **Once a product is opened or used it can no longer be returned.
-If using a hot water machine, scale build up from your coil can plug the foam filter. On start up always run power washer line clear before attaching foamer for about 30-60 seconds to flush out any build up.
How To Keep Your PF22.2 Foam Cannon Running Great: