Amp up your touchless wash ability with a system that works as hard as you do.
Chem-XM-ShineandRed-Linecombined on the vehicle surface create the one two punch known as the Chem-X Touchless Wash. These formulas are designed for everything from the most high end show trucks to cars, motorcycles, hot rods, RV's, buses and construction equipment.
When M-Shine and Red-Line mix on the vehicle surface, a resulting pH shock will activate the cleaning reaction. This dual stage process breaks the static bond of dirt and road film from the surface, allowing the high psi rinse to remove more grime then any single stage application and also results in a neutral pH. This process saves the user up to 80% of the time it would normally take to do a mitt wash.
M-Shinecleans and maintains reflectiveness on all surfaces including mirror polished aluminum,M-Shinealso helps loosen brake dust, bugs, diesel soot and effectively removes road salts.Red-Line cleans safely with hot water or cold and leaves a silicate that results in a first-rate finish.
*All M-Shine/Red-Line bundles ship free
DIRECTIONS AND TIPS FOR USING TOUCHLESS CHEMICALS:
ApplyM-Shineonto vehicle and go directly overM-Shine withRed-line.Apply these soaps in manageable sized sections working from bottom up. Keep in mind the goal of being able to rinse the soaps off before they have a chance to dry. Ideally each soap would have about 1-2 minutes of cling time before getting either neutralized or rinsed.
Once an area has been covered with both steps begin a high psi rinse. When rinsing we recommend an up close rinse. We find it works best to rinse from the bottom up, by doing this you can use the foam line to keep track of where you have hit with high psi rinse.
* Ideal use strength is determined after seeing the results of the first wash, the goal is to use as little soap as possible while getting a great wash. Two things that help get an effective touchless wash are good soft water and also heated water up to 140 degrees if available.
*Try not to wash in direct sunlight as this will greatly accelerate drying. When washing mirror polished aluminum always make sure aluminum is cool to the touch before applying soap and never let soaps dry. If you are just off the road and you have polished fuel tanks avoid washing until tanks are cool.
*Remember to always wear your PPE (personal protective equipment)