- FOAM CANNONS: 4 parts water : 1 part Old Glory
- PUMP SPRAYERS: 100 Parts Water : 1 part Old Glory
- POWER WASHERS: Run at 100:1
- Note: If you're using a Chem-X/Suttner Foam Injector, it automatically dilutes at 100:1. Just place the pickup tube into your gallon of Old Glory and tighten the Chem-X Flow Cap—the injector does the rest.
Old Glory: Touch Free Active Foam Vehicle Wash
-
In stock
Regular price
$97.00
Size — 1 Gal Old Glory
FEATURES
- Single-Step Touch-Free Cleaning
Formulated to eliminate the need for brushing when applied with proper pressure and dilution. Perfect for fleets, trucks, and heavy equipment. - High-pH Formula (pH 13)
Cuts through road film, grease, salt, bugs, and organic buildup with ease—ideal for heavy-duty applications. - Hyper-Concentrated Formula
Designed to perform at a 100:1 PIR (Product Injection Ratio) when used through a foam injector. A little goes a long way—excellent cost-efficiency. - Thick, Clinging Foam
Designed for use in foam cannons, foam injectors, and power wash systems. Produces rich foam for maximum dwell and cleaning power. - Fast Rinse, No Residue
Designed to rinse clean without streaks or spotting when used at proper dilution and water pressure.
ⓘ ARMORY INTEL
THE STORY OF OLD GLORY: A REVOLUTION IN CLEANING
Like the legendary flag that earned its name through resilience and unity, Old Glory touch-free active foam stands as a testament to American innovation and strength. Just as Captain William Driver’s flag sailed the high seas and survived through the Civil War, our Old Glory soap is built to withstand the toughest conditions.
Designed to conquer grime, grease, and road film with unmatched efficiency, Old Glory symbolizes the same relentless spirit that keeps America moving forward. This touch-free foam cuts through the grit like a revolutionary force, saving time and effort while delivering a brilliant shine.
Let Old Glory wave proud in your arsenal of detailing products, a reminder that nothing stands in the way of progress, precision, and perfection. With its powerful active formula, it’s not just a soap; it’s a declaration of independence from dirt and grime.
HYPER-CONCENTRATED
REMOVES ROAD FILM
TIRE + WHEEL CLEANER
HIGH PH
How to use Old GLory:
Dilution Ratios:
Washing Directions:
Old Glory works across a variety of setups. Here's how to apply it based on your equipment:
Foam Cannon (Chrome Cannon 2.0 or MTM PF22.2)
Mix Ratio: 1 part Old Glory to 4 parts water (1:4) in your foam cannon bottle
Pressure Washer Output: Ideal PSI 1500–4000 | GPM 2.0–5.3
Application:
Rinse vehicle to remove loose debris.
Foam entire vehicle with Old Glory solution.
Allow to dwell for 30–60 seconds (do not let dry).
Rinse thoroughly with high pressure.
Pump Sprayer
Mix Ratio: 1 part Old Glory to 100 parts water (1:100)
Best for spot-cleaning or when pressure washing isn’t available.
Application: Apply to a wet surface, allow short dwell, then rinse.
Apply to a wet surface
Allow Short dwell time
Rinse thoroughly with high Pressure
Power Washer with Injector (e.g., ST-160 or ST-164)
Run Ratio: 100:1 PIR
Pre-dilute soap in a 5-gallon pail if necessary to match injector draw rate.
Application: Apply to a wet surface, allow short dwell, then rinse.
Apply to a wet surface
Allow Short dwell time
Rinse thoroughly with high Pressure
Safety + Surface Notes:
- Do NOT allow Old Glory to dry on the surface—especially in direct sunlight.
- Avoid use on polished aluminum unless diluted beyond 100:1 and used with caution.
- Test on sensitive finishes before full application.
- Always rinse thoroughly to prevent spotting or streaks.
FAQs:
Is Old Glory safe on polished aluminum?
We advise against using Old Glory on polished aluminum surfaces. For a safer alternative, we recommend Stars + Stripes—or for the most gentle and coating-safe option, use Liquid-X.
Is Old Glory Safe for Ceramic Coatings?
Yes—but use with caution and do not let it dwell too long or dry on the surface. Rinse quickly and follow with a protective sealant like Snake Oil.
For routine maintenance, consider Liquid-X for maximum ceramic safety.
What's the difference between Old Glory and Stars + Stripes?
Old Glory is a high-pH, single-step touch-free foam soap designed for speed and simplicity—ideal for fast-paced washes and fleet applications. In contrast, Stars + Stripes is a two-step system that combines an acidic pre-soak (Stripes) with an alkaline foam (Stars) to safely remove road film while finishing at a neutral pH. It's the preferred choice for polished aluminum and more sensitive surfaces.
Customer Reviews
Based on 48 reviews
85%
(41)
4%
(2)
6%
(3)
0%
(0)
4%
(2)
J
Best soap out there makes my job quicker and easy I’ll be buying more 4 sure. Good job to the sales team always very kind and professional
M
Honestly one of the best touchfree washes I've ever used! Tried it on my welding rig to see if it would clean up some spilt diesel on my welding machine and the magchloride from the dirt roads. Sprayed it on let it sit but not dry and because I know that stuff is hard to get off I sprayed it one more time even though I could see the foam turning brown from the dirt and magchloride...let it sit and the sprayed it off from bottom to top like it says and it all came off without any scrubbing at all!. Wheels and tires came out looking like I detailed them also, this stuff is freakin amazing! I also tried it on an old car thats been sitting for a few years and wouldn't ya know looked just as good as my truck did, like the thing only had a week's worth of dirt and trash on it. I absolutely love this wash and im going to be buying the stars and stripes in the next couple days so I can see that stuff in action as well! Great freakin product guys, turned my hour plus wash into a 15 minute wash with the same results and less work!!!!
J
Weather I’m using it on fleet wash or show cars Old Glory is awesome!!!
W
The Stars and Stripes cut the wash time in half with our fire service fleet. Old glory cut it in half again with a single touch less soap.
M
Was super impressed how well it worked! First to using ChemX and I am sold. Best part is didn’t even have to touch the paint. Will definitely buy ChemX products again and would recommend to anyone
