FREE SHIPPING on all orders over $20 within the USA!

0

Your Cart is Empty

Foamers
  • Power Washing
  • Accessories
  • Suttner ST-160 Foam Injector

    SUTTNER ST-160 Single INJECTOR

    The Suttner ST-160 Chemical Injector is the most efficient and durable foam injector available, with a dilution range from 10:1 to 200:1. It automatically dilutes the soap to a predetermined strength eliminating soap waste or pre-mixing. The ST-160 arrives pre-set by us to draw at 100:1(1%) dilution, the ideal strength for all of our super concentrated liquids. MORE INFO HERE.
     

    Includes

    1. 3/8" Plug (Inlet)
    2. Chemical Pick Up Tube Barb (Inlet)
    3. 3/8" Coupler (Outlet)
    4. 10' Clear Pick Up Tube
    5. Flow Safe Strainer
    6. 10 Dosing Nozzles & O-Rings

    -

    • Plug + Play
    • Uses 4-5x Less Soap Than Traditional Style Injectors
    • 9 Dosing Nozzles Included
    • Durable Stainless Steel Construction

     

      HOW TO INSTALL

      1. Connect ST-160 injector after power washer and before your high psi hose. The ST-160 will be made ready with a stainless 3/8" quick connect plug on the inlet and a stainless 3/8" quick connect socket on the the outlet.

      2. Place chemical pick up tube directly into soap.

      3. Foam all of the things!

      • Injector will be set to run at 100:1 unless specified otherwise, this can be changed by simply changing metering tip inside injector barb.

      • If using a hot water machine, scale build up from your coil can plug injector or foam head. On start up always run with injector in rinse mode for about 30-60 seconds to flush out any build up.

      • If a jumper hose is needed to go from your power washer to ST-160 injector please see our selection of hoses in accessories.

      • Other downstream injectors must be removed from your machine.

      • Limited to 150' of power washer hose after the injector.

      • ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.

      - - 

      Click here for parts diagram

      *Other downstream injectors must be removed from your machine.
      *Limited to 150' of power washer hose after the injector.
      *ST-160 injectors come standard with a 3/8" QC Plug on the inlet and a 3/8" QC Coupling on the outlet. QC orientation can be reversed upon request.

      SPECS

      • Min/Max Flow Rate: 1-6gpm
      • Min/Max PSI: 1000-4000psi
      • Rated for 194 degree water