*Real Deal Kits are made to order and built by hand. They typically take a week to ship out.

The Chem-X Foam Lance lets you change between rinse and foam directly at the gun. Simply release trigger and twist The Suttner ST-58 Change Over Valve to either rinse or foam. The Chem-X Foam Lance screams quality and durability. Built with as much stainless steel as possible and designed to be very easy to use. By far the best foam lance on the market!

The Suttner ST-2305 Shut Off Gun made ready with the Mosmatic Inline Swivel (freely rotate your hose or gun) is an upgrade to any power washer setup. Mosmatic swivels are designed to rotate under pressure, in return it will make your power washing experience much more enjoyable. Say goodbye to user fatigue and fighting with your high psi hose.

The Suttner ST-164 Dual Chemical Injector is the most efficient and durable foam injector available, with a dilution range from 12:1 to 200:1. The easiest way to select between two chemicals and rinse. Simply switch lever on the top of the injector to the desired position(chem 1, chem 2, rinse) and let the soap fly. *See below for easy install directions.

- Must be sized according to your current nozzle size. If nozzle size is unknown, please call us with the GPM and PSI of your power washer.

Specs:

Chem-X Foam Lance

44" length
Stainless steel components
Min/Max Flow Rate: 1-6gpm
Min/Max PSI: 1000-4000psi
Rated for 212 degree water
Adjustable vented grip

Suttner ST-2305 Shut Off Gun

The easy pull trigger reduces trigger pulling force by 60% compared to other spray guns
Proper spray angle for optimal positioning of pressure points
5000 PSI

Suttner ST-164 Dual Chemical Injector

Integrated lever that allows you to easily switch from Stars to Stripes
Durable stainless steel housing
18 metering/dosing nozzles, each chemical can be set at individual desired strengths
Min/Max Flow Rate: 1-6gpm
Min/Max PSI: 1000-4000psi
Rated for 212 degree water

* Installation Directions:

1. Install ST-164 injector on wall using the provided mounting bracket within 10' of power washer. (If you would like the injector/valve further away or closer to your power please call Chem-X with jumper hose length.)

2. Connect power washer to ST-164 with provided 10' Suttner jumper hose.

Attach 3/8" quick connect plug from jumper hose to power washer outlet.
Attach 3/8" quick connect socket from jumper hose to inlet on ST-164

3. Plug the inlet of your power wash hose into outlet of the ST-164 using the provide quick connects.

4. Plug the outlet of your power washer hose into the Shut Off Gun using the quick connect plug or hard pipe hose directly into Mosmatic DGV Inline Swivel.

5. Place blue pick up tube in Stars and red pick up tube in Stripes.

6. Wash all of the things!

-Injector will be set to run at 100:1 unless specified otherwise, this can be changed by simply changing metering tip inside injector barbs.

-If using a hot water machine, scale build up from your coil can plug injector or foam head. On start up always run with injector in rinse mode for about 30-60 seconds to flush out any build up. We also offer another ST-75 Foam Nozzle which is better suited for hot water power washers

-This item usually ships within one week of order.

How to Quickly Repair Common Issues on Suttner Foam Gear!:

Your cart

Garden Hose Quick Connect Coupler

Description

new Arrivals

What customers are saying about

Join the Conversation